A clear, water-based wood preservative treatment for interior and exterior timber. Prevents insect attack, rot and decay.

Cuprinol Wood Preserver Clear is a colourless general-purpose preserver for interior* or exterior use. It gives deep penetrating protection to sound wood against decay, mould and blue-staining fungi.

*Occasionally wet or interior wood with risk of condensation.

How much do you need?
1L covers up to 5m² with 2 coats.

2.5L covers up to 12.5m² with 2 coats.

5L covers up to 25m² with 2 coats.

Coverage can vary depending on application method and the condition and nature of the surface.

Usage Guide

• Make sure wood is clean, dry and free from dirt.
• Wood that has been wood-stained, painted or vanished should be stripped back to bare wood.
• Apply 2 even coats with a brush. Leave the first coat to soak in before applying the second but reapply before the first is fully dry (typically 2-6 hours, depends on weather). Leave 16 hours for the second coat to dry before painting, staining or vanishing. Do not spray.

Note:

• This Clear preserver is used as the first step in treatment before using a stain.
• For a 2 + 1 (preserver + stain combo) use Cuprinol Ultimate Preserver.