This is a cleaner.
An easy to use gel that removes the grey, weathered surface of wood to reveal the natural timber colour.

• Works in 15 minutes
• Ideal before treating with furniture oil or stain
• Restores grey, weathered wood back to original colour

How much do you need?

A 1L tub is normally sufficient for: 8m².

Coverage quoted with 2 coats.

Coverage can vary depending on application method and the condition and nature of the surface.

Usage Guide

• Surface must be clean, dry and free from dirt, dust and any other surface contaminants.
• Stir thoroughly before use.
• Wearing suitable protective gloves, apply liberally with a paint brush. The wood will start to lighten in colour.
• Work into the surface of the wood using a mild abrasive scrubbing pad or stiff bristle brush.
• Leave to stand until no further lightening occurs, but for no more than 15 minutes.
• Work manageable areas at a time so that application, abrasion and washing off can be completed within 15 minutes.
• Wash off with plenty of water using a watering can or hose. Do not use a high pressure washer.
• Allow the furniture to dry thoroughly before use.

Notes:

• This product works by lightly bleaching the surface of hardwoods, such as teak and iroko. If the product has failed to work and the wood is considerably weathered, a further application may be required. The product needs to be applied liberally. Overspreading the gel will result in a less favourable performance.
• It needs to be allowed to stand and rubbed off until a lightening effect occurs – if this does not happen there maybe a requirement to leave it on for a little longer.